Commands Of Cli; Global Commands Of Cli - TP-Link TL-SG3424 User Manual

4-2. Commands of CLI

To see the commands of the mode, please input "?" after the prompt, then all
commands will be listed in the screen. All commands can be divided into two
categories, including global commands and local commands. Global commands can
be used wherever the mode you are. They are "exit", "end", "help", "history", "logout",
"save start", "save user", "restore default" and "restore user". For more details,
please refer to Section 4-2-1.
Command instructions reside in the corresponding modes are local
commands. The same command with the same command name may occur but
perform totally different function in different modes. For example, "show" in IP mode
performs displaying the IP information; however, it performs displaying the system
information in system mode. For more details, please refer to Section 4-2-2.
Fig. 4-3
145
User Manual
Publication date: January, 2006
Revision A2
User Manual

4-2-1. Global Commands of CLI

end
Syntax:
end
Description:
Back to the top mode.
When you enter this command, your current position would move to the top mode. If
you use this command in the top mode, you are still in the position of the top mode.
Argument:
None.
Possible value:
None.
Example:
* ( / 6 : D O D U P
* ( / 6 : D O D U P H Y H Q W V
* ( / 6 : D O D U P H Y H Q W V H Q G
* ( / 6 :
exit
Syntax:
exit
Description:
Back to the previous mode.
When you enter this command, your current position would move back to the
previous mode. If you use this command in the top mode, you are still in the position
of the top mode.
Argument:
None.
Possible value:
None.
Example:
* ( / 6 : W U X Q N
* ( / 6 : W U X Q N H [ L W
* ( / 6 :
Publication date: January, 2006
Revision A2
146