Checklist; Features - TP-Link TL-SG3424 User Manual

24 gigabit l2 managed switch
Hide thumbs Also See for TL-SG3424:
Table of Contents

Advertisement

Key Features in the Device
QoS:
Support Quality of Service by the IEEE 802.1P standard. There are two
priority queue and packet transmission schedule.
Spanning Tree:
Support IEEE 802.1D, IEEE 802.1w (RSTP: Rapid Spanning Tree
Protocol) standards.
VLAN:
Support Port-based VLAN and IEEE802.1Q Tag VLAN. Support 256 active
VLANs and VLAN ID 1~4094.
Port Trunking:
Support static port trunking and port trunking with IEEE 802.3ad LACP.
Bandwidth Control:
Support ingress and egress per port bandwidth control.
Port Security:
Support allowed, denied forwarding and port security with MAC address.
SNMP/RMON:
SNMP agent and RMON MIB. In the device, SNMP agent is a client
software which is operating over SNMP protocol used to receive the
command from SNMP manager (server site) and echo the corresponded
data, i.e. MIB object. Besides, SNMP agent will actively issue TRAP
information when happened.
RMON is the abbreviation of Remote Network Monitoring and is a branch of
the SNMP MIB.
The device supports MIB-2 (RFC 1213), Bridge MIB (RFC 1493), RMON
MIB (RFC 1757)-statistics Group 1,2,3,9, Ethernet-like MIB (RFC 1643),
Ethernet MIB (RFC 1643) and so on.
IGMP Snooping:
Support IGMP version 2 (RFC 2236): The function IGMP snooping is used
to establish the multicast groups to forward the multicast packet to the
member ports, and, in nature, avoid wasting the bandwidth while IP
multicast packets are running over the network.
User Manual
Publication date: January, 2006
Revision A2
3
User Manual

1-2. Checklist

Before you start installing the switch, verify that the package contains the
following:
A set of 24 Gigabit L2 Managed Switch
Modules (optional)
Mounting Accessory (for 19" Rack Shelf)
This User' s Manual in CD-ROM
AC Power Cord
RS-232 Cable
Please notify your sales representative immediately if any of the aforementioned
items is missing or damaged.

1-3. Features

The 24 Gigabit L2 Managed Switch, a standalone off-the-shelf switch,
provides the comprehensive features listed below for users to perform system
network administration and efficiently and securely serve your network.
Hardware
22 10/100/1000Mbps Auto-negotiation Gigabit Ethernet TP ports
2 10/100/1000Mbps TP or 1000Mbps SFP Fiber dual media auto sense
400KB on-chip frame buffer
Jumbo frame support
Programmable classifier for QoS (Layer 4/Multimedia)
8K MAC address and 4K VLAN support (IEEE802.1Q)
Per-port shaping, policing, and Broadcast Storm Control
IEEE802.1Q-in-Q nested VLAN support
Full-duplex flow control (IEEE802.3x) and half-duplex backpressure
Extensive front-panel diagnostic LEDs; System: Power, TP Port1-24: LINK/ACT,
10/100/1000Mbps, SFP Port 23,24: SFP(LINK/ACT)
Management
Supports concisely the status of port and easily port configuration
Supports per port traffic monitoring counters
Supports a snapshot of the system Information when you login
Supports port mirror function
Supports the static trunk function
Publication date: January, 2006
Revision A2
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents