Tftp Server; Log - TP-Link TL-SG3424 User Manual

3-19. TFTP Server

Function name:
TFTP Server
Function description:
Set up IP address of TFTP server.
Parameter description:
Specify the IP address where the TFTP server locates. Fill in the IP address of
your TFTP server, then press <Apply> button to have the setting taken effect.
Fig. 3-72
137
User Manual
Publication date: January, 2006
Revision A2
User Manual

3-20. Log

This function shows the log data. The switch provides system log data for
users. There are 19 private trap logs, 5 public trap logs. The switch supports total
120 log entries. For more details on log items, please refer to the section of
Trap/Alarm Configuration and SNMP Configuration.
Function name:
Log Data
Function description:
The Trap Log Data is displaying the log items including all SNMP Private Trap
events, SNMP Public traps and user logs occurred in the system. In the report
table, No., Time and Events are three fields contained in each trap record.
Fig. 3-73
Parameter description:
No.:
Display the order number that the trap happened.
Time:
Display the time that the trap happened.
Events:
Display the trap event name.
Auto Upload Enable:
Switch the enabled or disabled status of the auto upload function.
Publication date: January, 2006
Revision A2
138