Wiring - Bosch ICP-AMAX4-P1 Installation Manual

20 en | Optional Modules and Peripheral Devices
Address Jumper
Figure 5.10: Address
5.7.3

Wiring

Connect the RF3227E receiver to Bosch option Bus. The cable must not exceed 300 m. Adding
additional devices to the bus might reduce the maximum distance. Shielded cable is not
required. Do not use twisted pair wires.
AMAX 2100 / 3000
AMAX 4000
Figure 5.11: Connecting RF3227E
2014.4 | 01 | F.01U.267.112
R Y
B G
ADDR
Installation Guide
No Jumper = Receiver # 1 (Default)
Jumper left on pin for storage only.
Jumper = Receiver # 2
RF3227E
AMAX panel 4000 / AMAX panel 4000
Bosch Sicherheitssysteme GmbH
EN