AMAX panel 4000 / AMAX panel 4000
EN
Figure 8.14: Communication Settings
Notice!
Modem string settings in figure x.1 are only used, when the default modem string is not used.
If the default modem string should be used, activate parameter "Using the default modem
string" in register "Link" of Customer Information (see figure x.2). In this case the values in
figure x.1 are ignored.
Instead the following string is used: AT&CI&D2X0&Q0S7=255S9=0+MS=B103B17
–
Bosch Sicherheitssysteme GmbH
Click "New Customer" in "Customer" to create customer. Enter relevant customer
information in the "Customer Information" tab page. The "Customer Number" must be
entered. Enter the telephone number connected to the AMAX panel in "AMAX Panel
Telephone Number". The AMAX panel telephone number does not need to be set for
manual connection.
Installation Guide
Configuration | en
89
2014.4 | 01 | F.01U.267.112