Panasonic DP-1510P Service Manual page 321

< Paper Feed Module Operation >
a. When the printing operation begins, the Drive Motor (1105) starts driving the Gears.
b. The Clutch (1224) is energized for a specified period of time and turns ON. This activates the Feed
Roller (1213). The Recording Paper is separated into individual sheets by the C25 Separation Roller
(1207) and is transported.
c. The Recording Paper is transported to the Registration Roller (1162), activating the Photo Sensor
(604) for Registration. After a specified period of time, the Clutch (1141) is turned ON and the
Registration Roller (1162) and the Registration Pinch Roller start rotating. The Recording Paper is
transported to the OPC drum area.
d. The Recording Paper passes through the Photo Sensor (604) for Read Point and after a specified
period of time, the Clutch (1224) is turned OFF. The Registration Roller and the Registration Pinch
Roller stop rotating.
Edition 2.0
Clutch (1141)
321
Registration Roller (1162)
Timing Actuator (1146)
Photo Sensor (604)
for Registration
Feed Roller
(1213)
C25 Gear Roller
(1207)
C25 Separation Roller
(1207)
DP-1510P/1810P
/1810F/2010E
APR 2002