Panasonic DP-1510P Service Manual page 267

5.1.6. F7 Mode: Electronic Counter
Set the machine to Service Mode and press "7" on the Keypad.
↓
Press the "START" key.
↓
Select the desired code number on the Control Panel.
↓
If you wish to select another code number, scroll the menu with the arrow keys (↑ ↓).
↓
Select the desired function on the Control Panel and press the "START" key.
↓
When the "CLEAR" key is pressed, the selected setting inputted will not be accepted.
↓
Press the "FUNCTION" and "CLEAR" keys simultaneously to exit the Service Mode.
Service
Mode
F7 Electronic
Counter
Edition 2.0
Item
00 Not Used
01 Key Operator ID
Maintenance 02 Total Count
Count
03 PM Count
04 Scanner PM Count
05 ADF/i-ADF PM
Count
06 OPC Drum Count
27 Drum Rotate
Equivalent
07 Process Unit Count
08 Paper Transport
Count
Paper Feed 11 Sheet Bypass Count Total count of paper fed from the sheet
Count
12 1st Paper Tray Count Total count of paper fed from the 1st
13 2nd Paper Tray
Count
14 3rd Paper Tray
Count
15 4th Paper Tray
Count
Scanner Count 16 ADF/i-ADF Count
17 ADF/i-ADF Read
Count
18 Scanner Count
19 Scanner Read Count Total count of scanner read.
F7 Mode
Key Operator's identification code for
access to the counter mode.
Total count for all copies / prints.
Preventive Maintenance count.
PM count for scanner read.
PM count for originals fed.
PM count for OPC Drum paper fed.
PM count for OPC Drum Round Time.
PM count for Process Unit paper fed.
PM count for Paper Transport Unit paper
fed.
bypass.
paper tray.
Total count of paper fed from the 2nd
paper tray.
Total count of paper fed from the 3rd
paper tray.
Total count of paper fed from the 4th
paper tray.
Total count of originals fed through the
ADF/i-ADF.
Total count of originals scanned through
the ADF/i-ADF.
Total count of scanning operations.
267
DP-1510P/1810P
/1810F/2010E
Function
APR 2002