Panasonic DP-1510P Service Manual page 361

Edition 2.0
(12)
(11)
(12)
Note:
Remove the LANC PC Board from LANC BK
Assembly (DZHP004034).
(LANC Bracket : DZJB000166 : Not used)
(11) Connect the LANB-LANC Harness to CN200 on
the LANC PC Board.
(12) Install the LANC PC Board and secure with
2 Screws (XYN3+F8).
(13) Proceed with the installation of other options.
If finished, re-install the Rear Plate.
Note:
For 200 VDC Destinations Only.
Install the Ferrite Core to the Ethernet LAN
Cable with one loop as shown.
361
DP-1510P/1810P
/1810F/2010E
APR 2002