2.2.11. Fuser Unit
(3)
(2)
(8)
(6)
(13)
Edition 2.0
(4)
(2)
(1)
(7)
(9)
(5)
(12)
(10)
(11)
(B)
(A)
(1) Open the Right Cover (601) Assembly.
(2) 2 Screws (19).
(3) Remove the Front Connector Cover (714).
(4) Remove the Rear Connector Cover (713).
(5) 2 Screws (4N).
(6) Remove 2 Harnesses (1829).
(7) Remove 2 Harnesses (1813).
(8) Release 2 Harnesses (1829) from the Clamp.
(9) Remove the Fuser Unit.
(10) 1 Screw (23).
(11) 1 Screw (19).
(12) Remove the Lamp Holder (925).
(13) 1 Screw (23). (Opposite side)
Note:
When re-installing the Lamp Holder (925), insert
the Lamp Holder's Leg (A) into the Guide (B).
64
DP-1510P/1810P
/1810F/2010E
APR 2002