(37)
(36)
(35)
(42)
(43)
(44)
(47)
(45)
(50)
(49)
(48)
(50)
Edition 2.0
(41)
(40)
(39)
(38)
(45)
(45)
(46)
(51)
(35) Remove 2 Drive Belts (444, 445).
(36) Remove the S27 Pulley (443).
(37) Remove the Bushing (410).
(38) Remove the Snap Ring (B9).
(39) Remove the S27 Pulley (443).
(40) Remove the Bushing (410).
(41) Release the clips and remove the Switch (724).
Note:
Apply Molykote EM-50L Grease to 3 shafts on
Bracket R (447).
<Turn the ADF upside down>
(42) Remove the edge of the Scanning Pad (338).
(43) 1 Screw (19).
(44) Remove the Exit Roller (316) and P6L8
Bushing (317).
(45) 8 Screw (1N).
(46) Remove the Hinge Units L and R.
(47) Release 2 Latch Hooks.
<Return the ADF to its upright position>
(48) Remove the ADF Front Cover (302).
(49) Release the Harnesses (1837, 1839) from the
Clamp.
(50) 5 Screws (19).
(51) Remove the Original Tray.
40
DP-1510P/1810P
/1810F/2010E
APR 2002