Panasonic DP-1510P Service Manual page 38

(18)
(20)
(25)
(24)
Edition 2.0
Note:
(17) 1 Screw (19).
(17)
(18) Remove the ADF PC Board Cover (453).
(19) Release the Clamp from ADF Unit.
Note:
(20) Disconnect the Harness (1806) on the ADF PC
(19)
(21) 2 Silver Screws (B1).
(22) Remove 2 Angle Plate (305).
(22)
(21)
(23) Open the ADF Unit.
(24) 4 Screws (6A).
Caution:
(23)
(25) Remove the ADF Unit.
38
When re-installing the ADF Rear Cover (301),
make sure that the ADF Harness is properly
placed as shown in the illustration.
Do not cut the Tie-Wrap. Push the release clip on
the side of the clamp to remove it.
Board (CN21).
Don't close the ADF Unit subsequent to this step.
DP-1510P/1810P
/1810F/2010E
APR 2002