Panasonic DP-1510P Service Manual page 399

(39)
(40)
(43)
(46)
(47)
Edition 2.0
(39)
(37)
(45)
(48)
(37) Connect the PTC Heater Harness to PTC-AC
Harness 6.
(38) Remove the CST Rear Cover.
(Refer to ch 8.5. of the Service Manual)
(39) Install 6 Clamps as illustrated.
(40) Insert the PTC-AC Harness 6 into 4 Clamps.
(41) The procedure for 3rd and 4th Paper Feed
Modules is the same as steps (34)~(40).
(42) Main Unit Assembly, 2nd, 3rd and 4th Paper
Feed Modules.
(Refer to ch 8.5. of the Service Manual)
(43) Connect the PTC-AC Harness 7 to PTC-AC
Harness 4.
(44) Insert the PTC-AC Harness 7 into the Clamp as
illustrated.
(44)
(45) Route the PTC-AC Harness 7 to the right side of
the frame through the access hole as illustrated.
(46) Insert the PTC-AC Harness 7 into the Clamp as
illustrated.
(47) Insert the PTC-AC Harness 7 into 2 Clamps as
illustrated.
(48) Connect the PTC-AC Harness 7 to PTC-AC
Harness 6.
399
DP-1510P/1810P
/1810F/2010E
APR 2002