Panasonic DP-1510P Service Manual page 255

5.1.3. F4 Mode: Input/Output Check
Set the machine to service mode and press "4" on the Keypad.
↓
Press the "START" key.
↓
Select the Check Input or Check Output on the Control Panel.
↓
Enter the number to activate the test then press "START" key.
↓
Press "STOP" key to cancel the test.
↓
When the "CLEAR" key is pressed, the selected code input will not be accepted.
↓
Press "FUNCTION" and "CLEAR" keys simultaneously to exit the service mode.
1. Input Check
No. Function
000 Not Used
001 Paper Registration
Sensor (4th Paper Tray)
Paper Registration
Sensor (3rd Paper Tray)
Paper Registration
Sensor (2nd Paper Tray)
002 Registration Sensor
Paper Eject Sensor
Dual-Path Exit Guide Unit
Eject Sensor
006 Duplex Unit Sensor 4
Duplex Unit Sensor 3
Duplex Unit Sensor 2
Duplex Unit Sensor 1
007 JAM Access Cover Open
Detection Sensor
(4th Tray)
Paper Level Sensor
(4th Tray)
Paper Tray Sensor
(4th Tray)
NP Sensor (4th Tray)
Edition 2.0
F4 Mode (Input Check)
Condition
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Sensor is activated.
Cover is open.
Upper Limit is detected.
Paper Tray is detected.
Paper is detected.
255
Message Display
7 6 5 4 3 2 1 0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
DP-1510P/1810P
/1810F/2010E
Remark
For DP-1810F/2010E
For DP-1810F/2010E
For DP-1810F/2010E
APR 2002