(4)
(6)
(6)
(7)
Edition 2.0
(3) Using a Slotted Blade Screwdriver, remove the
(3)
(4) Install the i-ADF OPS Actuator.
(5) Install the 2 ADF Mounting Brackets.
(5)
(6) Secure the 2 brackets with 6 Screws
Note:
(7) Install 2 Thumb Screws (DZPA000064).
6~8mm
Note:
371
OPS Actuator as illustrated.
(XTB3+12J) as illustrated.
The remaining 2 Screws (XTB3+12J) will be
installed in step (20).
(One for each ADF Mounting Bracket)
When installing the Thumb Screws, do NOT
tighten them. Leave a clearance of approx. 6-8
mm, as illustrated.
DP-1510P/1810P
/1810F/2010E
APR 2002