Panasonic DP-1510P Service Manual page 238

Code Mode
725 XMT
POP
726 XMT
POP
730 RCV
731 RCV
741 XMT, Polling
800 Relay
Comm.
814 Conf. XMT
Conf. Polling
Relay
Comm.
815 Conf. RCV
816 Conf. Polled
825 Conf. RCV
Conf. Polled
870 MEM XMT
Multi-Copy
879 Memory
RCV
880 -
884 -
961 RCV
962 XMT
Edition 2.0
Fax Information Codes
Phase Description of Problem
LAN DNS Server connection timed out. Incorrect DNS Server address is set.
LAN Received an error response from
the DNS Server.
LAN Unable to program the Internet
parameters or the autodialer with
Email from a PC.
LAN Dialer full while Relayed
Transmission Request was
received.
Unable to dial
The machine was requested to
relay a document but has no Relay
Hub capability.
The remote station does not have
Relay XMT nor Confidential
Communication capability.
Mailbox is full.
The received Polling Password did
not match.
Parameter settings of the remote
station are not properly set.
Memory overflow occurred while
storing documents into memory.
PSTN Memory overflow occurred during
substitute memory reception.
LAN Memory overflow.
Mail Server sent a reset command
while downloading the data to the
machine.
- File Access Error.
- File Access Error.
LAN Memory file access error.
PSTN Memory file access error.
LAN Memory file access error.
DNS Server is down.
Incorrect POP Server address is set.
Incorrect SMTP Server address is set.
Verify that the Fax Parameter #158 is
set to 2: Valid.
Dial buffer for manual number dialing
(70 stations) are being used.
Deleted the registered station name
before dialing with Timer Controlled
Communications, etc.
Memory overflow on the Fax side.
Mail server aborted the download (Busy
with other higher priority jobs).
SC PCB is defective.
SC PCB is defective.
SC PCB is defective.
238
DP-1510P/1810P
/1810F/2010E
Cause
APR 2002