Installing Expansion Unit (Kx-Td170 / Kx-Td180) - Panasonic KX-TD816 Installation Manual

2.4.4 Installing Expansion Unit
(KX-TD170 / KX-TD180)
KX-TD816
1. Loosen two screws on the cover plate.
Insert fingers into the slits to remove the
cover plate.
Slit
Note There are two cover plates. Any of
them can be removed, as needed.
2. Connect the cabinet cord to the
connector in the main unit firmly.
2-50 Installation
The following procedures can be used to install either 8-Station
Line Unit (KX-TD170) or 4-CO Line Unit (KX-TD180) for KX-
TD816. The model numbers of the main units and expansion units
to be used are shown below.
• 4-CO Line Unit
Main Unit
KX-TD816BX/HK/ML
KX-TD816C/NL/NZ
• 8-Station Line Unit
Main Unit
KX-TD816BX/HK/ML
KX-TD816C/NL/NZ
The following steps 1 through 5 and 7 through 10 are common to
both expansion units.
The step 6 shows two different methods to install respective
expansion units.
Slit
D816
DIGITAL SUPER HYBRID SYSTEM
Expansion Unit
KX-TD180D (4-pin Connector)
KX-TD180 (Modular Connector)
Expansion Unit
KX-TD170D (6-pin Connector)
KX-TD170 (Amphenol Connector)
3. Hook the cabinet on the main unit and
slide the cabinet to the left until it is
fixed.
D816
DIGITAL SUPER HYBRID SYSTEM
4. Loosen the outside screw and slide the
cover to the right.
D816
DIGITAL SUPER HYBRID SYSTEM
Outside screw