2.4.9 System Connection*
Connection Cable
*: Available for KX-TD1232 only.
To connect two main units, use the optional System Inter
Connection Cards (two) and the Connection Cable (included in the
cards).
1. Insert upper side of the System Inter Connection
Card into two hooks on the main unit (Master
System).
2. Press two corners of the lower side of the System
Inter Connection Card.
3. Connect the cord to the System Inter Connection
Card connector.
4. Open the latch on the card.
5. Repeat steps 1 through 4 for the Slave System,
using the other card.
6. Insert one Connection Cable end to the Master
System and insert the other end to the Slave
System.
7. Close the latches on both systems.
KX-TD192 SYSTEM INTER CONNECTION
System Inter Connection Card
Installation
2-69