Executive Busy Override - Panasonic KX-TD816 Installation Manual

4.7 COS Programming
Description
Selection
Default
Programming
Conditions
Feature References

Executive Busy Override

Determines which Classes of Services (COS) are allowed to
perform Executive Busy Override – CO Line / Extension.
Executive Busy Override allows the user to intrude into an
established call.
• COS number: 1 through 8,
• Disable / Enable
All COS – Disable
1. Enter 505.
Display: Busy Override
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
Section 3, Features,
Executive Busy Override – CO Line
Executive Busy Override – Extension
( =all COS)
key at step 3. In this
System Programming
505
4-97