Caller Id Code Set - Panasonic KX-TD816 Installation Manual

110
Description
Selection
Default
Programming
Conditions
Feature References
4-42 System Programming
4.3 System Programming

Caller ID Code Set*

Sets the identification code of the calling party (Caller ID Code) to
utilize Caller ID Service provided by a specific central office (CO).
If an ID Code transmitted from CO is found in Caller ID Code
Table, the caller's ID Code or a name given to the code in program
[111] "Caller ID Name Set" is displayed on the telephone, allowing
the called party to recognize the caller.
• Location number: 001 through 500
• Caller ID Code: 11 digits (max.)
All locations – Not stored
1. Enter 110.
Display: Caller ID Code
2. Press NEXT.
Display: Location NO?–>
3. Enter a location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4. Enter a Caller ID Code.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new code.
5. Press STORE.
6. To program another location, press NEXT or PREV, or
SELECT and the desired location number.
7. Repeat steps 4 through 6.
8. Press END.
• There is a maximum of 250 Caller ID Codes. Each code has a
maximum of 11 digits, consisting of 0 through 9.
• Program [111] "Caller ID Name Set" is used to give names to Caller ID
If an ID Code is given a name, the called party's telephone
Codes.
shows the name in place of the ID Code
• Program [406] "Caller ID Assignment" is used to enable Caller ID
Service on a CO line basis.
Section 3, Features,
Caller ID
.
* : Available for KX-TD816C/1232C and
KX-TD816HK/1232HK only.