Expansion Unit Type - Panasonic KX-TD816 Installation Manual

109
Description
Selection
Default
Programming
4-40 System Programming
4.3 System Programming

Expansion Unit Type

Assigns the type of expansion units to be used in the system.
This allows the system to identify the unit in each expansion unit
location.
KX-TD816
• Areas 1; 2 = C1;E1 / E1;C1
(C1: 4-CO Line Unit, E1: 8-Station Line Unit)
KX-TD1232
• Master / Slave
• Areas 1; 2; 3 = C1;E1;E2 / C1;E2;E1/ E1;E2;C1 / E1;C1;E2 /
E2;E1;C1 / E2;C1;E1
(C1: 4-CO Line Unit, E1: 8-Station Line Unit 1, E2:
8-Station Line Unit 2)
KX-TD816: C1;E1
KX-TD1232: Master and Slave – C1;E1;E2
KX-TD816
1. Enter 109.
Display: Expansion Card
2. Press NEXT.
Display example: C1;E1
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press END.
KX-TD1232
1. Enter 109.
Display: Expansion Card
2. Press NEXT to program Master System.
To program "Slave," press NEXT again.
Display example: Master:C1;E1;E2
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
If only one system is in operation, go to step 8.
5. Press NEXT to program Slave System.
Display example: Slave :C1;E1;E2