Extra Device Port (Xdp) - Panasonic KX-TD816 Installation Manual

E
Programming References
Feature References
Operation References
—User Manual
E
Xtra Device Port (XDP)
Description
Conditions
Connection References
Programming References
3-64 Features
is used to perform this function. With a single line telephone, the
feature number cannot be used when the user already has a
Consultation Hold.
• During CO calls, a FLASH stored in System Speed Dialing, Station
Speed Dialing, One-Touch Dialing or Call Forwarding – to CO Line
functions as External Feature Access, not as Flash.
Section 4, System Programming,
[100] Flexible Numbering, External feature access
[413] Flash Time
[990] System Additional Information, Field (3)
Section 3, Features,
Flash
DPT Features, SLT Features;
External Feature Access

EXtra Device Port (XDP)

available in the system by allowing an extension jack to contain
two telephones. A digital proprietary telephone (DPT) and a single
line telephone (SLT) can be connected to the same jack but have
different extension numbers so that they can act as completely
different extensions.
• XDP requires previous programming of the individual jack. Enable
XDP mode for the desired jack by System Programming. Immediately
after changing the assignment, changed setting may not work for a
maximum of eight seconds.
• If an analog proprietary telephone (APT) and SLT are connected to an
XDP-enabled jack, neither telephones work.
• If XDP is disabled for the jack, DPT and SLT may be used as
Paralleled Telephones. APT and SLT also can be used as Paralleled
Telephones.
Section 2, Installation,
2.3.6 EXtra Device Port (XDP) Connection
Section 4, System Programming,
[600] EXtra Device Port
3
Host PBX Access
expands the number of telephones
Features