Display, Extension Programmed Data - Panasonic KX-TD816 Installation Manual

3 Features
D
isplay, Extension Programmed Data
Description
Conditions
Allows the display proprietary telephone user to confirm the
features assigned on the buttons on the telephone. When it is on-
hook (that is, when the handset is on the cradle and the SP-PHONE
button is off), pressing a button displays the use of the button or the
information assigned to the button for five seconds.
• Display examples
(1) If REDIAL; SAVE; or One-Touch Dialing button is pressed,
the stored number is displayed below:
950-1001PP12345&
(2) If the DSS or MESSAGE button is pressed, the extension
number and the name (if assigned) stored under the DSS button
or the source of the Message Waiting is displayed:
(3) If Account button is pressed, the display shows:
(4) If FWD/DND button is pressed, the selected feature assigned
on the button is shown as follows:
(a) If the Do Not Disturb feature is assigned:
Do Not Disturb
(b) If Call Forwarding- All Calls to extension 123 is assigned:
FWD(All)
(c) If Call Forwarding – Busy to extension 234 is assigned:
FWD(BSY) Ext234
(d) If Call Forwarding – No Answer to extension 345 is
assigned:
FWD(NA) Ext345
(e) If Call Forwarding – Busy / No Answer to extension 100 is
assigned:
FWD(B/NA) Ext100
(f) If Call Forwarding – To CO Line number 91201431 is
assigned:
FWD(CO) 91201431
• If the display characters exceed 16 digits, the mark "&" is shown at the
right-hand edge.
• This is used to display the data programmed for each PF
(Programmable Feature), DSS, SAVE, or REDIAL button. If Full-One
Touch Dialing is enabled on the telephone Full-One Touch Dialing will
be active instead.
123: Tony
Account
Ext123
D
Features 3-53