2.4.2 4-CO Line Unit Connection
Notes
Programming References
Feature References
2.4.3
8-Station Line Unit Connection
Notes
Programming References
Feature References
To add four CO lines (CO 5 through CO 8 for KX-TD816, and CO
9 through CO 12 for KX-TD1232), use the optional 4-CO Line
Unit (KX-TD180). This unit can be installed to any of the
expansion unit areas provided on the front of the main unit.
For 4-CO Line Unit Installation, see Section 2.4.4 "Installing
Expansion Unit (KX-TD170/KX-TD180)."
• System Programming is required for card location identification.
• If you intend to attach a Caller ID Card to the 4-CO Line Unit, attach it
before CO line connection. See Section 2.4.7 "Caller ID Card
Installation."
Section 4, System Programming,
[109] Expansion Unit Type
Section 3, Features,
Module Expansion
To add eight extensions (jack numbers 9 through 16 for KX-
TD816, and jack numbers 17 through 24 for KX-TD1232), use the
optional 8-Station Line Unit (KX-TD170).
To add 16 extensions for KX-TD1232 (jack numbers 17 through
32), use two 8-Station Line Units.
This unit can be installed to any of the expansion unit areas
provided on the front of the main unit.
For Extension Expansion Unit Installation, see Section 2.4.4
"Installing Expansion Unit (KX-TD170/KX-TD180)."
System Programming is required for card location identification.
Section 4, System Programming,
[109] Expansion Unit Type
Section 3, Features,
Module Expansion
Installation
2-49