Call Transfer Features - Summary; Call Transfer, Screened - To Co Line - Panasonic KX-TD816 Installation Manual

3 Features
C
ALL TRANSFER FEATURES – SUMMARY
Description
C
all Transfer, Screened – to CO Line
Description
Conditions
Programming References
Feature References
Operation Reference
—User Manual
Call Transfer features allow the user to transfer a call to another
party. This operation can be screened or unscreened. Screened
call transfer is used when you want to announce the call to the
other party before completing the transfer. Unscreened call
transfer immediately releases the caller to the called party. An
intercom or a CO call can be transferred to an extension or to an
outside party by:
Call Transfer, Screened – to CO Line
Call Transfer, Screened – to Extension
Call Transfer, Unscreened – to Extension
Allows the proprietary telephone user to voice-announce to the
external party and transfer the call.
• Class of Service programming determines the extensions that are able
to perform it.
• If a call between two external parties is established by this feature, the
duration of the call period is restricted by a system timer. Hold Recall
is generated to the extension who transferred the call 50 seconds before
the time-out. Also Hold Alarm tone is generated to both outside
parties 15 seconds before the time-out. The call is disconnected at the
time-out unless the extension restores the conference.
• Transferring a call to an external party cannot be performed from a
single line telephone.
• If the KX-TD1232NL is used, only extension call can be transferred to
CO line.
Section 4, System Programming,
[205] Extension-to-CO Line Call Duration Time
[206] CO-to-CO Call Duration Time
[502] Extension-to-CO Line Call Duration Limit
[503] Call Transfer to CO Line
[990] System Additional Information, Field (1)
Section 3, Features,
Hold Recall
DPT Features,
Call Transfer — to CO Line
C
Features 3-33