Installing Expansion Unit - Panasonic KX-TD1232 Installation Manual

General Installation

2.4.6 Installing Expansion Unit

The following procedures can be used to install the optional expansion units.
The following steps 1 through 5 and 7 through 10 are the same for all expansion units. Step 6
is different for each unit.
The KX-TD1232 is illustrated as the main unit.
1.
Loosen the two screws on the cover plate. Insert fingers into the slits to remove the cover
plate.
Slit
Note
Any of the cover plates can be removed, as needed.
2.
Connect the cabinet cord to the connector in the main unit firmly.
82
Slit
Installation Manual