2.4.8 Doorphone and Door Opener
Connection
Installing the Doorphone
1. Loosen the screw to separate the
doorphone into two halves.
2. Install the base cover to the wall with two
screws.
Note
Two kinds of screws are included.
Please choose an appropriate one
depending on your wall type:
Type 1: When the doorphone
Type 2: When you wish to
3. Connect the wires from the terminal box to
the screws located in the front cover.
To the terminal box (See
the following page.)
4. Secure both halves together and re-install the
screw.
To connect up to two doorphones (KX-T30865) and up to two door
openers (user-supplied), a Doorphone Card (KX-TD160) is
required.
screw
plate has been fixed to
the wall.
install the doorphone
directly to the wall.
Doorphone Card Installation
1. Connect a 4-conductor modular connector
to the Doorphone Card Cabinet, and pass
the cord through the groove on the cabinet.
2. Attach the Doorphone Card Cabinet to the
main unit and press it down.
3. Connect the cord to the Doorphone Card
Connector.
KX-TD1232
KX-TD816
To Terminal
Box
Installation
2-65