Extension-To-Co Line Call Duration Limit - Panasonic KX-TD816 Installation Manual

502

Extension-to-CO Line Call Duration Limit

Description
Selection
Default
Programming
Conditions
Feature References
4-94 System Programming
4.7
This program allows you to restrict the duration of CO calls on a
Class of Service (COS) basis.
• COS number: 1 through 8,
• Disable (no limit) / Enable (limit)
All COS – Disable
1. Enter 502.
Display: CO Durat. Limit
2. Press NEXT.
Display: COS NO?–>
3. Enter a COS number.
To enter COS number 1, you can also press NEXT.
Display example: COS1:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another COS, press NEXT or PREV, or
SELECT and the desired COS number.
7. Repeat steps 4 through 6.
8. Press END.
• A CO call originated or answered by the programmed extension user is
disconnected when the time specified in program [205] "Extension-to-
CO Line Call Duration Time" expires.
• Extensions in the limited classes cannot establish a CO-to-CO call, that
is, cannot transfer / forward a CO call to another CO line or perform an
Unattended Conference.
• To assign all COS to one selection, press the
case, the display shows the contents programmed for COS 1.
• Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
• Program [990] "System Additional Information, Field (12)" is used to
program Limited Call Duration to be done for outgoing calls only.
Section 3, Features,
Call Forwarding – to CO Line
Call Transfer, Screened – to CO Line
COS Programming
( =all COS)
key at step 3. In this
Conference, Unattended
Limited Call Duration