Disa Dtmf Repeat - Panasonic KX-TD816 Installation Manual

812
Description
Selection
Default
Programming
Conditions
Feature References
4-122 System Programming
4.9 Resource Programming

DISA DTMF Repeat*

Selects whether the system transmits DTMF signals directly to the
central office (CO) or if the system repeats the DTMF signals to
CO in order to adjust gain. This can be done for a DISA CO-to-CO
call during dialing and / or during an established call.
• Dial (during dialing) / Call (during an established call)
• Mode: Repeat / Through
Dial and Call – Repeat
1. Enter 812.
Display: DISA DTMF Repeat
2. Press NEXT to program the mode during dialing.
To program the mode during an established call, press NEXT again.
Display example: Dial:Repeat
3. Keep pressing SELECT until the desired selection is
displayed.
4. Press STORE.
5. Press NEXT to program the mode during an established call.
Display example: Call:Repeat
6. Keep pressing SELECT until the desired selection is
displayed.
7. Press STORE.
8. Press END.
None
Section 3, Features,
Direct Inward System Access (DISA)
*: Available for KX-TD1232 only.