13
13.8
Adjusting the color registration
Adjusting the color registration for black
Adjust the color registration if color shifts can be seen in the print result.
The following procedure uses A3-size paper to adjust the color registration.
0 Perform color registration adjustments starting with black. With the black
adjustment as a reference, adjust the registration for the other colors (yel-
low, magenta and cyan).
0 The test pattern can be printed on A3 w, 11 × 17 w, A4 v or 8-1/2 × 11 v
paper that can only be loaded into the 1st drawer.
1
Display the Administrator Setting screen.
–
For details on displaying the Administrator Setting screen, refer to
"Displaying the administrator setting screen" on page 13-55.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [7 Color Registration Adjust].
The Color Registration Adjust screen appears.
5
Touch [4 Color Registration Adjust (Black)].
The Color Registration Adjust (Black) screen appears.
6
Press the [Start] key.
A test pattern is printed.
13-70
Utility
MF45