Enhanced Security Mode; Hdd Setting - Olivetti d-Color MF45 Operation Manual

13

Enhanced security mode

Description
Settings necessary for applying the Enhanced Security mode appear. Select whether or not to
apply enhanced security settings when the necessary settings are specified. For details, contact
your technical representative.

HDD setting

Parameter
Check HDD Capacity
Temporary Data Over-
write Setting
Overwrite All Data
HDD Lock Password
HDD Formatting
HDD Encryption Set-
ting
Management function setting
Parameter
Network Function Set-
ting
Note
For details on displaying [Function Setting], [Max. No. of Sets to Copy
Setting] and [Authentication Time Setting], contact your technical repre-
sentative.
13-54
Description
Specify settings for using boxes. For details, refer to the Box Opera-
tions of the MF45 user manual.
Select whether or not image data is temporarily
written to the hard disk with all operations for
copying, scanning, faxing and computer print-
ing. For details on the settings, refer to the User
manual [Box Operations]. By specifying a set-
ting on the Temporary Data Overwrite Setting
screen, the area of the hard disk where image
data is saved can be overwritten after the data
is printed or sent, and the data can be erased.
This process prevents disclosure of image data
on the hard disk.
Select this parameter to overwrite all data on
the entire hard disk when returning this ma-
chine in order to prevent disclosure of the data.
For details on the settings, refer to the User
manual [Box Operations]. Before performing
this operation, contact your technical repre-
sentative.
Specify the password for protecting the data on the hard disk.
Select this parameter to format the hard disk.
Appears when optional security kit is installed. Specify the settings for
encrypting the hard disk. When a setting is specified, all data written
to the hard disk is encrypted to protect it. If the encryption key is
changed, the hard disk will be reformatted.
Description
Specify settings for network functions that are
difficult to count when managing operations.
Utility
Default Setting
OFF
Mode 1
Default Setting
Allow
MF45