Olivetti d-Color MF45 Operation Manual page 596

13
– If the lines are shifted in the Y direction as shown below, touch [+]
under "Y" to increase the adjustment (between 1 dot and 6 dots).
– Each time [+] or [–] is touched, the value is increased or decreased
by one increment.
– If the lines are not shifted from the reference lines, skip to step 10.
8
Press the [Start] key.
The adjusted test pattern is printed.
When is the adjustment applied?
?
% The adjustment is applied when the [Start] key is pressed. To can-
cel the adjustment, touch [Cancel] instead of pressing the [Start]
key.
9
Check the print result.
– If there is no shift between the black and cyan lines, continue with
step 10.
– If more adjustment is necessary, repeat steps 7 and 8.
10
Touch [OK].
– To cancel changes to the settings, touch [Cancel].
13-76
Utility
MF45