Emptying The Waste Containers - Olivetti d-Color MF45 Operation Manual

Replacing toner cartridges and staples and emptying waste containers
10.4

Emptying the waste containers

If the hole-punch waste container in punch kit PK-501 installed on finisher
FS-603 becomes full, the message shown below appears (if it can be emp-
tied by the user).
Note
The setting for emptying the hole-punch waste container should be spec-
ified by the technical representative. For details, contact the technical
representative.
The default setting is "Service". If a message appears, immediately con-
tact the technical representative.
Display for the Punch Dust Box setting
MF45
10
10-29