Punching Holes In Copies (Punch Settings) - Olivetti d-Color MF45 Operation Manual

4

Punching holes in copies (Punch settings)

!
Detail
In order for holes to be punched in the copies, all of the following condi-
tions must be met.
The paper width must be between 280 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
If a Punch setting is to be selected, select the orientation in which the
document is positioned. If an Original Direction setting is not selected,
holes may not be punched in the copies as desired.
For details on specifying the document orientation, refer to "Selecting the
document orientation (Original direction settings)" on page 4-23.
When Finisher FS-603 and Punch Kit PK-501 are installed
Paper Weight
2
60 g/m to 209 g/m
When Finisher FS-507 is installed
Paper Weight
2
60 g/m to 90 g/m
4-88
Paper Size
2
A3 w, A4 v
Paper Size
2
A3 w, A4 v
Basic copy operations
MF45