Olivetti d-Color MF45 Operation Manual page 605

Utility
– Do Not Synchronize:
This setting requires that all information be entered for user authen-
tication and account track each time that the machine is used.
11
Beside "# of Counters Assigned for Users", specify the desired setting.
– Press the [C] (clear) key to erase the value, and then use the keypad
to specify the desired value (between 1 and 999).
– If user authentication and account track settings have been ap-
plied, counters can be assigned to both accounts and users, and
counts for both can be totaled.
12
Touch [OK].
– If the setting for "User Authentication" or "Account Track" was
changed, the message "Are you sure you want to clear all data?"
appears.
13
Touch [Yes].
The authentication method is set.
Continue by specifying settings for user authentication and account
track.
Reminder
Do not differentiate between uppercase and lowercase letters in the user
name for the external server. Since the MF45 cannot differentiate be-
tween uppercase and lowercase letters, the operation may not be per-
formed correctly.
Note
If optional image controller IC-402 is being used, but is turned off and
"User Authentication" is set to "ON (External Server)", a message ap-
pears when the main unit is turned on, indicating that the image controller
be turned on. Since authentication of the external server cannot be per-
formed, turn on image controller IC-402.
If image controller IC-402 is already on when this message appeared,
wait a while since the image controller may just be starting up.
MF45
13
13-85