Olivetti d-Color MF45 Operation Manual page 450

9
4
Using the keypad, type in the starting page number.
– If necessary, touch [Chapter], and then use the keypad to type in
the chapter number.
– The setting for "Page #" can be set to a number between -99999
and 99999, and the setting for "Chapter" can be set to a number
between -100 and 100. When specifying a starting number, switch
the number between positive and negative by pressing the [ ] key.
If a negative value is specified, the numbers are not printed until the
numbering reaches 1. For example, if "-1" was specified, the num-
bers are printed starting with "1" on the third copied page.
– To cancel changes to the settings, touch [Cancel].
– To cancel the "Page #" function, touch [OFF].
5
Specify the page number format.
6
Touch [Print Position], and then select the printing position.
9-78
Application functions
MF45