Adjusting The Starting Print Position At The Left Edge - Olivetti d-Color MF45 Operation Manual

13

Adjusting the starting print position at the left edge

The starting print position at the left edge of the paper (with respect to the
paper feed direction) for each paper drawer can be adjusted.
Adjustments can be specified for each paper drawer.
0 The starting print position is adjusted during manufacturing of the ma-
chine. Normally, this position will not need to be adjusted.
0 Only A4 v paper can be used to adjust the bypass tray.
1
Display the Administrator Setting screen.
– For details on displaying the Administrator Setting screen, refer to
"Displaying the administrator setting screen" on page 13-55.
2
Touch [1 System Setting].
The System Setting screen appears.
3
Touch [7 Expert Adjustment].
The Expert Adjustment screen appears.
4
Touch [2 Printer Adjustment].
The Printer Adjustment screen appears.
5
Touch [2 Centering].
The Centering screen appears.
6
Touch the button for the paper drawer to be set.
7
Press the [Start] key.
A test pattern is printed.
13-60
Utility
MF45