Olivetti d-Color MF45 Operation Manual page 477

Replacing toner cartridges and staples and emptying waste containers
To clear jammed staples in finisher FS-603
0 If the message "Staple mode cannot be used." appears, be sure to per-
form the following procedure.
If the following procedure is not followed and the paper is pulled out with
too much force, the stapler unit may be damaged.
1
Slide the finisher away from the ma-
chine.
2
Open the horizontal transport unit
cover, and then remove any misfed
paper.
3
Close the horizontal transport unit cover.
4
Open the misfeed-clearing guide for
the finisher, and then remove any
misfed paper.
MF45
10
10-23