Olivetti d-Color MF45 Operation Manual page 599

Utility
7
Place the printed test pattern on the original glass.
– Be sure to load the paper in the orientation shown on the screen.
8
Place into the 1st drawer 10 or more sheets of blank paper of the same
size as the printed test pattern page.
9
Close the ADF.
10
Press the [Start] key.
The printed test pattern is scanned.
When the test pattern is scanned, the gradation levels are automatical-
ly adjusted based on the scanned image.
11
Repeat steps 6 through 10 three times.
12
Touch [Close].
MF45
13
13-79