Olivetti d-Color MF45 Operation Manual page 576

13
3
Type in the administrator password, and then touch [OK].
For details on typing in text, refer to "Entering text" on page 14-3.
The Administrator Setting screen appears.
Note
To quit specifying the Utility mode setting, touch [Exit] in the sub display
area or press the [Utility/Counter] key. Otherwise, touch [Close] in each
screen until the desired screen appears.
Reminder
The default administrator password is "12345678". The administrator of
this machine should change the administrator password.
Be sure to keep the administrator password in a safe place. If the admin-
istrator password is lost, it must be specified by the technical represent-
ative. For details, contact the technical representative.
13-56
Utility
MF45