Olivetti d-Color MF45 Operation Manual page 559

Utility
Expert adjustment
Parameter
AE Level Adjustment
Printer Ad-
justment
Finisher
Adjust-
ment
MF45
Description
Set the initial value for auto exposure be-
tween 0 and 4. The higher the setting,
the more that the document background
is emphasized.
Leading Adjust the starting print position be-
Edge tween –3.0 and 3.0 mm from the current
Adjust- position at the leading edge of the paper
ment (with respect to the paper feed direc-
tion). Adjustments can be specified for
each paper type.
Centering Adjust the starting print position be-
tween –3.0 mm and 3.0 mm at the left
edge of the paper (with respect to the
paper feed direction). Adjustments can
be specified for each paper drawer.
Centering Adjust the starting print position be-
(Duplex tween –3.0 mm and 3.0 mm at the left
2nd Side) edge of the paper for the second side
during automatic double-sided copying.
Adjustments can be specified for each
paper drawer.
Vertical If the copy image is distorted (stretched
Adjust- or compressed), the paper feed speed
ment and printing speed can be synchronized
to adjust the copy image. For details on
making this adjustment, contact your
technical representative.
Erase The width of the area erased from the
Leading leading edge (margin) can be adjusted to
Edge 4 mm, 5 mm, or 7 mm. For details on
making this adjustment, contact your
technical representative.
Center Adjust the center stapling position be-
Staple tween –7 mm and 7 mm for printing with
Position the "Fold & Staple" setting.
Half-Fold Adjust the center folding position be-
Position tween –7 mm and 7 mm for printing with
the "Half Fold" setting.
13
Default Setting
2 (standard)
0.0 mm
0.0 mm
0.0 mm
–
4 mm
0 mm
0 mm
13-39