Job Printing; Figure 2.9 Configuring New Fields; Figure 2.10 Production Window - After Set Up, Cs150 - Kodak Versamark DS5600 Series Operator's Manual

4. To create a new job setup, or change the setup to add necessary
fields to the labels, drag the selected fields from the Field List and
place them in the template (Figure 2.9).
Figure 2.9 Configuring New Fields
5. When the setup is complete, the job is ready to run. Continue with

"Job Printing."

Job Printing
When the required files are ready, complete the following steps to print a
job:
1. In the Dashboard window, check the job and setup before starting to
print (Figure 2.10). Also check the transport or mailbase to make sure
it is ready to operate.
Figure 2.10 Production window - after set up, CS150
Chapter 2. Operation
Controller Operation
Operator Guide 27