Menus And Screens; Figure 2.4 Diagnostics Window; Figure 2.5 Devices Menu, Diagnostics Screen - Kodak Versamark DS5600 Series Operator's Manual

Chapter 2. Operation
Controller Operation
22 DS5600 Series Printing Systems

Menus and Screens

Operation of the system from the CS150 is done using selections under
the following main menu buttons:
The selections have the following functions:
Production
Used to select the files needed to print a job and do all other basic
operating procedures.
Configurator
Used to configure a new printer or print station.
Diagnostics
Opens the Diagnostics window (Figure 2.4) that is used primarily for
service procedures, but can be used to check the status of narrow-
format printers fluid and data systems.
Figure 2.4
Note: The Diagnose selection on the main menu runs tests that check the
status of all devices (printers and print stations) connected to the CS150.
If a device is not communicating for any reason, it will show an error. A
device that is powered off will not communicate. This screen is also used
to remove a device from the setup (Figure 2.5). Consult a service techni-
cian before changing the system configuration or running diagnostics.
Figure 2.5
Exit
Closes the CS150 software.
About
Provides the version number of the CS150 software.
Diagnostics window
Devices menu, Diagnostics screen