Print Stations; Figure 1.3 Dt3 Print Station - Kodak Versamark DS5600 Series Operator's Manual

Chapter 1. Overview
DS5600 Components
Figure 1.3 DT3 Print Station
14 DS5600 Series Printing Systems

Print Stations

The Kodak Versamark DP5600 Print Station is a new component used
only in the DS5600 Series Printing Systems.
The DP5600 consists of a fluid controller for the printhead (DH5300,
DH6240, or DH6300) and an operator terminal for the print station
controller software. When the CS150 is mounted on a Kodak Versamark
DT2 cabinet, the same computer serves as the operator terminal for both
the CS150 and the print station using a KVM (keyboard/video/monitor)
switch.
The DT3 cabinet (Figure 1.3) contains the entire fluid system for the
printhead, an internal fluid controller PC, and the Compact DS Main
Board with associated cables. The PC in the DT2 cabinet controls fluidic
and electronic operation of the print station and umbilical. The Compact
DS Main Board relays processes data received over the Ethernet from the
CS150 and transmits rasterized, fiberoptic image data to the printhead.
Printhead
Keyboard
Fluid cabinet
Data Main Board
Umbilical
Monitor