Kodak Versamark DS5600 Series Operator's Manual page 17

Chapter 2.
Operation of a Kodak Versamark DS5600 Series Printing System consists
of the following procedures:
• System Preparation
• Startup Procedures
• Controller Operation
• Print Station Operation
The Kodak Versamark CS150 System Controller Software is used to
control the system. The CS150 can be used to control the fluid systems
and data systems of narrow-format printers, but not Kodak Versamark
DP5600 Series Print Stations. When a DP5600 print station is configured,
the Fluid Controller Software that runs on the computer in the DP5600
print station must be used to control that fluid system and printhead.
Note: If two DP5600 print stations are configured, each one must be operated
using its own operator terminal. The first DP5600 shares the operator
terminal of the CS150, but the second DP5600 has a separate operator
terminal.
The primary reference for all CS150 software procedures is the online
Help (see "System Preparation").
Note: Systems ship with the current version of CS150 System Controller
software (Version 4.0.2.0 as of publication of this guide). Systems with
earlier versions of the software, including all versions called Kodak Versa-
mark Mailscape Software, may not be compatible with the DS5600 series
printing systems. Contact technical support for information on software
upgrades.
Operation
Operator Guide 17