Service Program Mode Tables - Ricoh B089 Service Manual

SERVICE PROGRAM MODE

4.2.2 SERVICE PROGRAM MODE TABLES

Service Table Key
Notation
[range / default /
step]
italics
*
1111
DFU
Japan only
(S)
(L)
B089/B093
Example: [-9 ~ +9 / +3.0 / 0.1 mm step]. The setting can be
adjusted in the range ±9, the setting is reset to +3.0 after an
NVRAM reset, and the value can be changed in 0.1 mm steps with
each key press.
Comments added for reference.
Value stored in NVRAM. After a RAM reset, this default value
(factory setting) is restored.
An SP number set in bold-italic denotes a "Special Service
Program" mode setting that appears only after entering the SP
mode by pressing  and Copy SP together. (! 4.2.1)
Denotes "Design or Factory Use". Do not change this value.
The feature or item is for Japan only. Do not change this value.
Sideways feed direction
Lengthwise feed direction
What it means
4-6 SM