Ricoh B089 Service Manual page 260

SERVICE PROGRAM MODE
5832 HDD Formatting
Enter the SP number for the partition to initialize, then press #. When execution
ends, cycle the machine off and on.
5832 1 ALL
5832 2 IMH
5832 3 Thumbnail
5832 4 Job Log
5832 5 Printer Fonts
5832 6 User Info.
5832 7 Mail RX Data
5832 8 Mail TX data
5832 9 Data for Design
5832 10 Fax
5832 11 Ridoc I / F
5833* Job Log Transfer On/Off Setting
Switches the job log transfer on/off for Poplar server. DFU
0: Off (disable), 1: On (enable)
5834 Operation Panel Image Exposure
Enables and disables the operation panel read (dump) feature. After powering on
the machine, set this option to 1 to enable this feature.
0: Off (disable), 1: On (enable) DFU
To reset the machine to 0, the machine must be turned off and on again. Selecting
0 for this option without cycling the power off and on does not restore the default
setting (0).
B089/B093
Initializes entire content of the HDD.
Initializes 1) documents stored on the document server, 2)
stamp print data, 3) scanner delivery images, 4) fax delivery
images.
Initializes MCS thumbnail images.
Initializes job data used by the Poplar server. Japan Only
Initializes printer fonts, overlay forms.
Initializes user information (UCS)
Initializes mail receive data (DCS)
Initializes mail send data (DCS)
Designer use only.
Initializes the logs (fax history and debug log)
Initializes the NetFile management area.
4-44 SM