Relay Clutches - Ricoh B089 Service Manual

PAPER FEED

6.6.7 RELAY CLUTCHES

[C]
[B]
[A]
[D]
B089R903.WMF
B089R717.WMF
[F]
[E]
B089R714.WMF
1. Remove the optional duplex unit and/or by-pass tray unit if they have been
installed.
2. Remove the rear cover and lower rear cover. (! B022 service manual, 6.6.3)
3. Remove the lower right cover [A] (2 screws).
4. Remove the scanner right cover. (! B022 service manual, 6.1.2)
5. Remove the right cover [B] (4 screws).
6. Swing down the I/O board bracket. (! B022 service manual, 6.6.5)
7. Remove the connector bracket [C] ( x 2).
8. Replace the upper relay clutch [D] ( x 1,  x 1).
9. Remove the right rear cover [E] (1 screw).
10. Replace the lower relay clutch [F] ( x 1,  x 1).
SM 6-29 B089/B093