Ricoh B089 Service Manual page 288

SERVICE PROGRAM MODE
8 061 T:FIN Jobs
These SPs total the finishing methods. The finishing method is
specified by the application.
8 062 C:FIN Jobs
These SPs total finishing methods for copy jobs only. The finishing
method is specified by the application.
8 063 F:FIN Jobs
These SPs total finishing methods for fax jobs only. The finishing
method is specified by the application.
Note: Finishing features for fax jobs are not available at this time.
8 064 P:FIN Jobs
These SPs total finishing methods for print jobs only. The finishing
method is specified by the application.
8 065 S:FIN Jobs
These SPs total finishing methods for scan jobs only. The finishing
method is specified by the application.
Note: Finishing features for scan jobs are not available at this time.
8 066 L:FIN Jobs
These SPs total finishing methods for jobs output from within the
document server mode screen at the operation panel. The finishing
method is specified from the print window within document server
mode.
8 067 O:FIN Jobs
These SPs total finishing methods for jobs executed by an external
application, over the network. The finishing method is specified by
the application.
8 06x 1 Sort
8 06x 2 Stack
8 06x 3 Staple
8 06x 4 Booklet
8 06x 5 Z-Fold
8 06x 6 Punch
8 06x 7 Other
B089/B093
Number of jobs started in Sort mode. When a stored
copy job is set for Sort and then stored on the document
server, the L: counter increments. (See SP8 066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine
is in staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the
Booklet mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is
set for a print job, the P: counter increments. (See SP8
064 6.)
Reserved. Not used.
4-72
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
[0~9999999/ 0 / 1]
SM