Exposure Glass - Ricoh B089 Service Manual

6. REPLACEMENT AND ADJUSTMENT

CAUTION
Turn off the main power switch and unplug the machine before attempting
any of the procedures in this section.
6.1 SCANNER UNIT

6.1.1 EXPOSURE GLASS

[A]
[C]
1. Open the ADF or platen cover.
2. Remove the left scale [A] (2 screws).
3. Remove the rear scale [B] (3 screws).
4. Remove the exposure glass [C].
NOTE: When reinstalling the exposure glass, make sure that the mark [D] is
positioned at the rear left corner, as shown.
SM
[D]
B027R001.WMF
6-1
SCANNER UNIT
[B]
B089/B093