Ricoh B089 Service Manual page 233

2101* Erase Margin Adjustment
2101 1 Leading Edge
2101 2 Trailing Edge – Small Paper
Adjusts the trailing edge erase margin for paper of length 216 mm or less.
The specification is 3
Adjustment" for details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
2101 3 Trailing Edge – Middle Paper
Adjusts the trailing edge erase margin for paper of length 216.1 ~ 297 mm.
The specification is 3
Adjustment" for details.
[0.0 ~ 9.0 / 3.0 / 0.1 mm/step]
2101 4 Trailing Edge – Large Paper
Adjusts the trailing edge erase margin for paper longer than 297 mm.
The specification is 3
Adjustment" for details.
[0.0 ~ 9.0 / 4.0 / 0.1 mm/step]
2101 5 Left Side
Adjusts the left edge erase margin.
The specification is 2
Adjustment" for details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
2101 6 Right Side
Adjusts the right edge erase margin.
The specification is 2
Adjustment" for details.
[0.0 ~ 9.0 / 2.0 / 0.1 mm/step]
2101 7 Rear – Trailing Edge (Duplex 2nd Side)
Adjusts the trailing edge erase margin on the reverse side of duplex copies.
The actual trailing edge erase margin on the reverse side is this value plus the
value of SP21012 or 3 or 4.
The specification is 3
Adjustment" for details
[0.0 ~ 9.0 / 1.2 / 0.1 mm/step]
2101 8 Rear – Left Side (Duplex 2nd Side)
Adjusts the left side erase margin on the reverse side of duplex copies.
The actual left side erase margin on the reverse side is this value plus the value of
SP21015.
The specification is 2
Adjustment" for details.
[0.0 ~ 9.0 / 0.3 / 0.1 mm/step]
2101 9 Rear – Right Side (Duplex 2nd Side)
Adjusts the right side erase margin on the reverse side of duplex copies.
The actual right side erase margin on the reverse side is this value plus the value
of SP21016.
The specification is 2 +2.5/–1.5 mm. See "Replacement and Adjustment - Copy
Adjustment" for details.
[0.0 ~ 9.0 / 0.3 / 0.1 mm/step]
SM
Adjusts the leading edge erase margin.
±
The specification is 3 2 mm. See "Replacement and
Adjustment - Copy Adjustment" for details.
[0.0 ~ 9.0 / 3.0 / 0.1 mm/step]
±
2 mm. See "Replacement and Adjustment - Copy
±
2 mm. See "Replacement and Adjustment - Copy
±
2 mm. See "Replacement and Adjustment - Copy
±
1.5 mm. See "Replacement and Adjustment - Copy
+
2.5/-1.5 mm. See "Replacement and Adjustment - Copy
±
2 mm. See "Replacement and Adjustment - Copy
±
1.5 mm. See "Replacement and Adjustment - Copy
4-17
SERVICE PROGRAM MODE
B089/B093